Subtotal: $0.00
 
Newsletter
Facebook
Twitter

Featured Products

Displaying 1 - 24 of 24 Product(s):
Sort By:

The iClear 30B is one of Innokin's newest tanks on the market. It uses a bottom coil atomizer similar to a Protank to deliver an amazingly warm and flavorful vape. Boasting a 3.0ml tank and a replacable dual coil atomizer this tank is sure to quickly become one of your favorites

$16.00

The Kanger Aerotank offers the same great features and performance as the Kanger Protank - II but with the introduction of a dual coil atomizer head! It also has adjustable airflow control. Turn the dial on the base to increase or decrease airflow to your prefer. The Aerotank holds 3.0ml of e-juice and uses the Protank 3 Dual Coild replacement atomizers. (Protank 2 and Evod atomizers will work as well)

18350 10.5A 700mah Efest Battery

Technical Specs:

 

Full Charge Voltage: 4.2V
Battery Cell Material: LiMn
Battery Model: 18350 (Flat)
Capacity: 700mAh
Continuous Max. Discharging Current: 10.5A
Charge Current: 2.15A
Discharge cut-off voltage: 3.0V
Positive: Flat Top
Protection: Unprotected
Cycle Life: 300 Cycles
Dimensions: 34.63(L)mm*18.31(D)mm

Professor Marvel?s Master Blend (10ml & 35ml)

This is it, the 2nd juice we have received from the professor. This is a light tobacco flavor with nice smooth, sweet, and creamy undertones. Some could call this our version of an RY4. Here is what people are saying: Dude u have some really great juices. The master blend is awesome man. I believe if you pushed it and got that juice out there you would sell barrels of it. It has the rich caramel of many custom ry4 blends. Equally strong (but mostly on the exhale) is a delicious vanilla cream. And the tobacco lingers out front throughout the vape. Master Blend is a high quality RY4 that blends smooth with bold. Definitely an all-day flavor.  My friends were amazed by how awesome it tastes. Besides the taste though, the throat hit isn't like super strong but it is smooth as butter and it has plumes of vapor. The master blend is really good, as well as smooth. Will become my favorite (don't lose the recipe)

$6.50 - $18.50

The K-100 is hailed as one of the most cost-effectice and sturdiest mechanical mods in the market. The K-100 is machined from stainless steel so durability is extremely high. The telescoping battery tube accomodates all 18 series batteries(i.e. 18350,500, etc..) Comes with a locking ring to prevent unwanted firing and a beautiful spring switch. This device is 510 threaded and fully mechanical

$33.99

 he NiteCore Intellicharge i2 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The i2 is able to automatically identify Li-ion, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The i2 has two microcomputer-controlled charging slots which are capable of monitoring and charging 1-2 of the same or different types of batteries. Additionally, yellow and blue power/charging status indicator lights visibly indicate battery status and the charging process. The i2 is an all-new highly advanced smart charger. It's as simple as insert, detect, and charge. 

18500 15A 3.7V IMR Battery

Technical Specs:

  • Battery Size: 18500
  • Nominal Voltage: 3.7V
  • Battery Capacity: 1000mAh
  • Lowest Discharge Voltage: 2.50V
  • Standard Charge: CC/CV (max charging rate 2A)
  • Maximum continuous discharge: 15A
  • Battery Top: Flat Top
  • Battery Type: LiMn
The VHO Titan

The Titan is light weight, high grade aluminum mechanical mod. It is made in the Philippines and each mod is individually numbered. The body of the mod is adjustable, and can be used with a variety of different batteries (18350-18650?s). The top cap and firing button are made of brass, and they are machined beautifully. Call the store for color options. We have red, blue, green, and gold.

The Evod 2 is a bottom coil clearomizer system similiar to the popular Protank. The Evod 2 holds 2ml of juice and is a dual coil atomizer that uses the replacement Aerotank/Protank 3/Evod 2 coils. This tank's warm and flavorful vapor delivery is sure to become a quick favorite for any vaper

This is our newest starter kit, and it is fantastic. It comes with 2- 650mah passthrough batteries, 5 clearomizers, a USB charger, and a wall charger. What is nice about this kit, is when the battery is fully charged, the LED light in the button will be green when it is fully charged. It will turn yellow when it has a half charge, and red when it is running low. You can use the mini USB charger to recharge it, but since it can be charged from the bottom, you can also use it while it is charging! The kit comes in a nice box, with instructions, and is very easy to use. Just add a bottle of juice, and you are ready to vape!!

Filipino made Wide-Bore Drip Tips from Critical MInds. All these drip tips, with the exception of the Stainless Steel tip, have a removable delrin base for heat dissapation to keep your metal drip tip cool

Main Features:

  • Variable Voltage: voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments

  • Variable Wattage: Wattage can be adjusted from 6.0 – 11.0 W in .5 watts  increments

  • Ohms meter : Reads resistance of your atomizer/cartomizer/clearomizer

  • Puff Counter

  • Short Circuit/Atomizer Protection:

  • Over-Discharge Protection

  • Battery Level Indicator

  • Large battery capacity

  • iTaste MVP e-cigarette built-in 2600 mAh polymer Li-Ion rechargeable battery

  • High compatibility 510 connector

  • Thread fits iClear10, iClear16, iClear30 etc

  • ON/OFF battery switch

  • 10 seconds cutoff

  • Pass through

  • Remembers last set voltage or wattage when the battery is turned off and then back on

  • Built-in 3 digit display : Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the battery was turned off

  • Portable power source for electronic products

The NiteCore Intellicharge i4 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The i4 is able to automatically identify Li-ion, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). The i4 has 4 microcomputer-controlled charging slots which are capable of monitoring and charging 1-4 of the same or different types of batteries. Additionally, yellow and blue power/charging status indicator lights visibly indicate battery status and the charging process. The i4 is an all-new highly advanced smart charger. It's as simple as insert, detect, and charge. 

Was: $79.99
Now: $69.99
$37.99
This item is currently out of stock.
iHybrid Pure
Was: $99.00
Now: $90.00

Made in the USA from Medical-grade, solid stainless steel. Elegant and comfortable, this drip tip features the same long body as our acrylic Mings for excellent draw and its vase-like shape sits comfortably in your lips. Its fine brushed finish is either an elegant addition to your drip tip collection or the only one you'll ever use again! Connection fits 510 and 901.

$18.00
This item is currently out of stock.

 This is Doc Dave's newest creation and it's titanium!

Was: $159.00
Now: $140.00
These are the mini version of the Cirrus Cartomizer Tank. These custom tanks are the taller, smaller version of our Pyrex tanks, but made with a high resistance polyurethane plastic–great for the “rough and tough” vapers. Comes with a matching drip tip and holds 2ml of juice.
*Cartomizer not included
$38.00
$10.00
$10.00

 Two-toned material (304 stainless steel and tiger bronze) 22mm body diameter AFC capable for dual and single coil builds 2.5mm height and 3mm width each airhole Tripole with quad terminal functionality Juice well functionality 250 C insulator melting point Serialized Authenticity card included.

$119.99

 The JM22 is a beautiful 22mm mod. It Features a quick locking ring and silver plated brass contacts. The threads on these mods are butter smooth and swtich feels the same as the thread.  Both Stainless and pressed brass versions will come with 18350, 18500, and 18650 tubes. You won't be disappointed with this one!

*All sales on high end devices are final and Nashville Vapor is not liable for any improper use of these devices. There is no returns, refunds, or exchanges on these mods.

$190.00 - $220.00

 This gorgeous mod includes three ingraved tubes (18350, 18500, 18650) all of which are engraved with the serial number on each tube. Everything from the sealed wooden box that it's packaged in to the actual mod itself screams elegance. It is available in both stainless and brass. The contacts are silver plated copper and it comes with a spring or magnets for the switch. Also included is an spring loaded top contact or telescopic top contact. This device is certainly the staff favorite and we're sure it will become yours too!

* All sales are FINAL. There is no returns, refunds or exchanges. Nashville Vapor is not liable for any improper use of this mod.

$250.00
 
© 2014  Nashville Vapor. All Rights Reserved. Sancia Industries LLC P.O. Box 58068, Nashville TN 37205